Problem z biblioteką DS1302 - LCD-Blue-I2C - Wersja do druku +- Arduino Polska Forum (https://forum.arduinopolska.pl) +-- Dział: Korzystanie z Arduino (https://forum.arduinopolska.pl/dzial-korzystanie-z-arduino) +--- Dział: Instalacja i rozwiązywanie problemów (https://forum.arduinopolska.pl/dzial-instalacja-i-rozwi%C4%85zywanie-problem%C3%B3w) +--- Wątek: Problem z biblioteką DS1302 - LCD-Blue-I2C (/watek-problem-z-bibliotek%C4%85-ds1302-lcd-blue-i2c) |
RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 17-01-2017 Witam jakie oprogramowanie najlepiej ściągnąć? Aktualnie mam 1.8.1 może to jest przyczyną że nie kompiluje się !!! RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - -adamek - 18-01-2017 Podaj błędy całość. RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 18-01-2017 np:co z tym kodem jest nie tak #include <Time.h> #include <Wire.h> #include <LiquidCrystal_I2C.h> #include <DS1302RTC.h> DS1302RTC RTC(27, 29, 31); #define DS1302_GND_PIN 33 #define DS1302_VCC_PIN 35 #include <Time.h> LiquidCrystal_I2C lcd(); void setup() { lcd.begin(20, 4); digitalWrite(DS1302_GND_PIN, LOW); pinMode(DS1302_GND_PIN, OUTPUT); digitalWrite(DS1302_VCC_PIN, HIGH); pinMode(DS1302_VCC_PIN, OUTPUT); lcd.print("RTC activated"); delay(500); lcd.clear(); if (RTC.haltRTC()) lcd.print("Clock stopped!"); else lcd.print("Clock working."); lcd.setCursor(0,1); if (RTC.writeEN()) lcd.print("Write allowed."); else lcd.print("Write protected."); delay ( 2000 ); lcd.clear(); lcd.print("RTC Sync"); setSyncProvider(RTC.get); if(timeStatus() == timeSet) lcd.print(" Ok!"); else lcd.print(" FAIL!"); delay ( 2000 ); lcd.clear(); } void loop() { static int sday = 0; lcd.setCursor(3, 0); print2digits(hour()); lcd.print(" "); print2digits(minute()); lcd.print(" "); print2digits(second()); // Update in 00:00:00 hour only if(sday != day()) { lcd.setCursor(0, 1); lcd.print(dayShortStr(weekday())); lcd.setCursor(5, 1); lcd.print(" "); print2digits(day()); lcd.print("/"); print2digits(month()); lcd.print("/"); lcd.print(year()); } if(timeStatus() != timeSet) { lcd.setCursor(0, 1); lcd.print(F("RTC ERROR: SYNC!")); } sday = day(); delay (100); } void print2digits(int number) { if (number >= 0 && number < 10) { lcd.write('_'); } lcd.print(number); } RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 18-01-2017 błędy This report would have more information with "Show verbose output during compilation" enabled in File > Preferences. Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno" DS1302_LCD:8: error: 'DS1302RTC' does not name a type DS1302_LCD.ino: In function 'void setup()': DS1302_LCD:21: error: request for member 'begin' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:30: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:34: error: request for member 'clear' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:35: error: 'RTC' was not declared in this scope DS1302_LCD:36: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:38: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:40: error: request for member 'setCursor' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:41: error: 'RTC' was not declared in this scope DS1302_LCD:42: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:44: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:49: error: request for member 'clear' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:50: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:51: error: 'RTC' was not declared in this scope DS1302_LCD:51: error: 'setSyncProvider' was not declared in this scope DS1302_LCD:52: error: 'timeStatus' was not declared in this scope DS1302_LCD:52: error: 'timeSet' was not declared in this scope DS1302_LCD:53: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:55: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:59: error: request for member 'clear' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD.ino: In function 'void loop()': DS1302_LCD:67: error: request for member 'setCursor' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:68: error: 'hour' was not declared in this scope DS1302_LCD:69: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:70: error: 'minute' was not declared in this scope DS1302_LCD:71: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:72: error: 'second' was not declared in this scope DS1302_LCD:75: error: 'day' was not declared in this scope DS1302_LCD:77: error: request for member 'setCursor' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:78: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:78: error: 'weekday' was not declared in this scope DS1302_LCD:78: error: 'dayShortStr' was not declared in this scope DS1302_LCD:81: error: request for member 'setCursor' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:82: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:84: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:85: error: 'month' was not declared in this scope DS1302_LCD:86: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:87: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:87: error: 'year' was not declared in this scope DS1302_LCD:90: error: 'timeStatus' was not declared in this scope DS1302_LCD:90: error: 'timeSet' was not declared in this scope DS1302_LCD:91: error: request for member 'setCursor' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:92: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:96: error: 'day' was not declared in this scope DS1302_LCD.ino: In function 'void print2digits(int)': DS1302_LCD:104: error: request for member 'write' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' DS1302_LCD:106: error: request for member 'print' in 'lcd', which is of non-class type 'LiquidCrystal_I2C ()()' RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - namok - 19-01-2017 Zamiast Kod: LiquidCrystal_I2C lcd(); Kod: LiquidCrystal_I2C lcd(0x27); RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - namok - 19-01-2017 Dlaczego teraz kompilujesz plik HelloWorld_i2c? RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 19-01-2017 Nadal błąd This report would have more information with "Show verbose output during compilation" enabled in File > Preferences. Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno" DS1302_LCD:8: error: 'DS1302RTC' does not name a type DS1302_LCD:16: error: no matching function for call to 'LiquidCrystal_I2C::LiquidCrystal_I2C(int)' C:\Users\DANIEL\Documents\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:57: note: candidates are: LiquidCrystal_I2C::LiquidCrystal_I2C(uint8_t, uint8_t, uint8_t) C:\Users\DANIEL\Documents\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:55: note: LiquidCrystal_I2C::LiquidCrystal_I2C(const LiquidCrystal_I2C&) DS1302_LCD.ino: In function 'void setup()': DS1302_LCD:35: error: 'RTC' was not declared in this scope DS1302_LCD:41: error: 'RTC' was not declared in this scope DS1302_LCD:51: error: 'RTC' was not declared in this scope DS1302_LCD:51: error: 'setSyncProvider' was not declared in this scope DS1302_LCD:52: error: 'timeStatus' was not declared in this scope DS1302_LCD:52: error: 'timeSet' was not declared in this scope DS1302_LCD.ino: In function 'void loop()': DS1302_LCD:68: error: 'hour' was not declared in this scope DS1302_LCD:70: error: 'minute' was not declared in this scope DS1302_LCD:72: error: 'second' was not declared in this scope DS1302_LCD:75: error: 'day' was not declared in this scope DS1302_LCD:78: error: 'weekday' was not declared in this scope DS1302_LCD:78: error: 'dayShortStr' was not declared in this scope DS1302_LCD:85: error: 'month' was not declared in this scope DS1302_LCD:87: error: 'year' was not declared in this scope DS1302_LCD:90: error: 'timeStatus' was not declared in this scope DS1302_LCD:90: error: 'timeSet' was not declared in this scope DS1302_LCD:96: error: 'day' was not declared in this scope RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 19-01-2017 sorki pomyliłem się ale tamten też nie wchodzi RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - namok - 19-01-2017 Którą wersję biblioteki LiquidCrystal ściągnąłeś? Podaj nazwę pliku zip. Czy w katalogu C:\Users\DANIEL\Documents\Arduino\libraries\ masz jeszcze inne biblioteki LiquidCrysta? Jeśli tak to przenieś je w inne miejsce. Dlaczego używasz starej wersji Arduino-IDE? RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - -adamek - 19-01-2017 Kod PHP: #include <Time.h> |