Problem z biblioteką DS1302 - LCD-Blue-I2C - Wersja do druku +- Arduino Polska Forum (https://forum.arduinopolska.pl) +-- Dział: Korzystanie z Arduino (https://forum.arduinopolska.pl/dzial-korzystanie-z-arduino) +--- Dział: Instalacja i rozwiązywanie problemów (https://forum.arduinopolska.pl/dzial-instalacja-i-rozwi%C4%85zywanie-problem%C3%B3w) +--- Wątek: Problem z biblioteką DS1302 - LCD-Blue-I2C (/watek-problem-z-bibliotek%C4%85-ds1302-lcd-blue-i2c) |
RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 20-01-2017 Moduł I2C DH44780 RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - mati12_14 - 20-01-2017 Spoko,wiecej mi nie trzeba. Wgraj skecz hello world jeszcze raz na adres 0x27 w takim wypadku.Najlepiej jak wpiszesz tamte polecenie deklaracji wyswietlacza bo napewno dziala na taki konwerter jak masz. W setup dopisujesz jeszcze lcd.backlight(); i powinno byc spoko. Jak bedzie migac wyswietlacz to odpal monitor szeregowy. Czasem to pomaga na resety. Nie bede tlumaczyl dlaczego bo sam srednio wiem. Jesli zadziala to pomyslimy co dalej z tym fantem zrobić. Teoretycznie wiem,ale w praktyce otwarty port za bardzo mi nie przeszkadza w testowaniu. RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 20-01-2017 to jest ten kod po dopisaniu nie da się wgrać #include <Wire.h> #include <LiquidCrystal_I2C.h> #define BACKLIGHT_PIN 13 LiquidCrystal_I2C lcd(0x27); // Set the LCD I2C address //LiquidCrystal_I2C lcd(0x27, BACKLIGHT_PIN, POSITIVE); // Set the LCD I2C address // Creat a set of new characters const uint8_t charBitmap[][8] = { { 0xc, 0x12, 0x12, 0xc, 0, 0, 0, 0 }, { 0x6, 0x9, 0x9, 0x6, 0, 0, 0, 0 }, { 0x0, 0x6, 0x9, 0x9, 0x6, 0, 0, 0x0 }, { 0x0, 0xc, 0x12, 0x12, 0xc, 0, 0, 0x0 }, { 0x0, 0x0, 0xc, 0x12, 0x12, 0xc, 0, 0x0 }, { 0x0, 0x0, 0x6, 0x9, 0x9, 0x6, 0, 0x0 }, { 0x0, 0x0, 0x0, 0x6, 0x9, 0x9, 0x6, 0x0 }, { 0x0, 0x0, 0x0, 0xc, 0x12, 0x12, 0xc, 0x0 } }; void setup() { int charBitmapSize = (sizeof(charBitmap ) / sizeof (charBitmap[0])); // Switch on the backlight pinMode ( BACKLIGHT_PIN, OUTPUT ); digitalWrite ( BACKLIGHT_PIN, HIGH ); lcd.begin(16,2); // initialize the lcd for ( int i = 0; i < charBitmapSize; i++ ) { lcd.createChar ( i, (uint8_t *)charBitmap[i] ); } lcd.home (); // go home lcd.print("Hello, ARDUINO "); lcd.setCursor ( 0, 1 ); // go to the next line lcd.print (" FORUM - fm "); delay ( 1000 ); } void loop() { lcd.home (); // Do a little animation by writing to the same location for ( int i = 0; i < 2; i++ ) { for ( int j = 0; j < 16; j++ ) { lcd.print (char(random(7))); } lcd.setCursor ( 0, 1 ); } delay (200); } RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - mati12_14 - 20-01-2017 Sprawdź ten: Kod: #include <Wire.h> RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 21-01-2017 Wgrywa się jest ok ale zegara nadal nie mogę wgrać RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - mati12_14 - 23-01-2017 Może po prostu coś jest źle w kodzie zegara.Najpierw wgraj sam przykład zegara i zobacz czy działa. Jeśli zadziała to zmodyfikuj swój kod. RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 23-01-2017 Możesz zerknąć na ten kod #include <DS1302RTC.h> #include <Time.h> #include <Wire.h> #include <LiquidCrystal_I2C.h> #define BACKLIGHT_PIN 3 LiquidCrystal_I2C lcd(0x27,2,1,0,4,5,6,7,3,POSITIVE); const char *monthName[12] = { "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" }; void setup() { lcd.begin(16, 2); lcd.setBacklightPin(BACKLIGHT_PIN,POSITIVE); lcd.setBacklight(HIGH); } void loop() { tmElements_t tm; if (RTC.read) { lcd.setCursor (0, 0); LCDprint2digits(tm.Hour); lcd.print(':'); LCDprint2digits(tm.Minute); lcd.print(':'); LCDprint2digits(tm.Second); lcd.setCursor (0, 1); lcd.print(tm.Day); lcd.print('/'); lcd.print(monthName[tm.Month-1]); lcd.print('/'); lcd.print(tmYearToCalendar(tm.Year)); } else { if (RTC.chipPresent()) { lcd.println("DS1302 stoi. Uruchom Zegar"); } else { lcd.println("DS1302 blad oczczytu!"); lcd.println("sprawdz polaczenie"); } delay(9000); } delay(1000); } //void print2digits(int number) { // if (number >= 0 && number < 10) { // Serial.write('0'); // } // Serial.print(number); //} void LCDprint2digits(int number) { if (number >= 0 && number < 10) { lcd.write('0'); } lcd.print(number); } RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 23-01-2017 This report would have more information with "Show verbose output during compilation" enabled in File > Preferences. Arduino: 1.0.6 (Windows 7), Board: "Arduino Uno" In file included from RTC_Zegar.ino:1: C:\Users\DANIEL\Documents\Arduino\libraries\DS1302RTC/DS1302RTC.h:95: error: 'time_t' does not name a type C:\Users\DANIEL\Documents\Arduino\libraries\DS1302RTC/DS1302RTC.h:96: error: 'time_t' has not been declared C:\Users\DANIEL\Documents\Arduino\libraries\DS1302RTC/DS1302RTC.h:97: error: 'tmElements_t' has not been declared C:\Users\DANIEL\Documents\Arduino\libraries\DS1302RTC/DS1302RTC.h:98: error: 'tmElements_t' has not been declared RTC_Zegar.ino: In function 'void loop()': RTC_Zegar:22: error: 'tmElements_t' was not declared in this scope RTC_Zegar:22: error: expected `;' before 'tm' RTC_Zegar:24: error: 'RTC' was not declared in this scope RTC_Zegar:24: error: 'tm' was not declared in this scope RTC_Zegar:37: error: 'tmYearToCalendar' was not declared in this scope RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - mati12_14 - 23-01-2017 masz bardzo jasne komunikaty... pokaz kod RE: Problem z biblioteką DS1302 - LCD-Blue-I2C - danyy11 - 23-01-2017 Cytat:#include <DS1302RTC.h> |